- Sensors – 4 Nos.
- Hands Free Display Unit – 1
- Battery Life– 7+ Years
- Accuracy – ± 2°C and ±1 Psi | ±100 Metres for Last Location
- Product Warranty- 5 Years ‘Question Free’ Product Replacement
Smart Sensor & Display Car Kit
(Inclusive of all taxes)
- Hands-Free in Car Display: Real-time alerts on dashboard without a mobile
- Helps you ensure if everything is OKAY before you start to drive
- App-based Internal Tyre Pressure & Temperature Tracking System
- Fast Leak & Inflation Detection
- A solar-powered accessory with Internal battery backup of 20+ Days
- No Wiring Required– Just Sync the accessory with your Smart Sensors & Use
- No Mobile Required, Personalised Wake Up Screen Available for hassle-free experience
- Provides real-time alerts on your dashboard with a buzzer sound while driving
- LCD TFT display for clear visibility
- USB charging in case of Low light days
- 0-100 PSI range
EASY & QUICK INSTALLATION
Pass the valve through the borehole and insert the clamp from the other side. Apply proper pressure using a spanner and tighten the valve.
Screw the sensor into the top of the stem using the Allen key. Use a torque wrench to hold the valve stem and maintain the vertical position, then tighten the screw with adequate torque.
Place the HUD on the dashboard and switch on. Open the mobile app and sync the detected HUD with your sensors
To activate the display switch on the car and wait for the HUD to detect vibration of the vehicle to display the tyre health metrics
Follow detailed instructions given in the User Manual for DIY installation OR visit your nearest tyre care center for a quick installation.
BRAND YOU CAN TRUST
- 4 Clamp in Valve Type TPMS sensors (No Stepney)
- Solar Powered In-Cabin Display
- A Quick Start User Guide